Volkswagen Polo
TSI / GTI (2018-2024)
Factory Torque Setting
120Nm
Always use a calibrated torque wrench.
Bolt Pattern (PCD)5x100CB: 57.1mm
Critical Safety Warning
Do NOT use an impact gun (rattle gun) to do the final tightening. Overtightening causes: 1) Warped brake discs (shuddering), 2) Stretched studs, 3) Cracked alloy wheel seats. Always torque by hand in a Star Pattern.
1Tightening Sequence
A
Hand tighten all nuts until seated.
B
Lower vehicle until tire touches ground (no full weight).
C
Torque to 84 Nm (70%).
D
Final Torque to 120 Nm in Star Pattern.
5-Stud Star Pattern
Why are correct torque settings detailed?
Modern Volkswagen alloy wheels are sensitive to uneven clamping force. Overtightening can stretch the wheel studs (leading to failure) or warp the brake rotors. Undertightening is obviously dangerous. Speedline recommends checking torque after 50km of driving.